Lower Engine Mounts 89-01 CR500 & 97-01 CR250 engine aluminum frame conversion

Description

This auction is for
a set of two aluminum engine mounts used in the conversion of a modern Honda chassis to accept a 1989-2001 CR500 engine and a 1997-2001 CR250 engine.
These engine mounts are made of 5/16" thick 6061-T6 aluminum. They are cut out on a CNC water jet then de-burred in a media tumbler. The base of these mounts are longer than necessary so you can trim the bottom to fit your frame rails. You can cut the old engine mount off, leaving the base of the original mount welded to the frame for a nice thick location to weld the new mount to. The bottom of this mount is offset from the mounting hole so it will be centered in the middle of the original engine mount base for a nice strong weld.
Download the
Conversion Manuals
. These manuals include detailed instructions and photos on how to perform each of the modifications for great looking results.
We offer billet aluminum Y-pieces, engine mounts, head brackets, coil mount bracket, exhaust and silencer mounts, airbox adapter plates and radiator outlet parts for various engine conversions. We also offer complete kits at a discount.
Feel free to contact us with with questions about the conversion process.
Legal Disclaimer
In so much as the Property may hereafter be installed by the Buyer or the Buyer’s agent on another motorcycle, which may require significant alterations to the motorcycle, including but not limited to the cutting of the motorcycle’s frame, the Buyer expressly waives any claim for and indemnifies Seller against any future unknown or unexpected injuries, damages, and/or losses resulting from the installation of the Property described above. The Seller recommends that the Property be installed by a bonded professional. The Buyer agrees purchasing and accepting this is a full and final release of any future damages.